New roof
The shingles were old and getting brittle. So we went over the old shingles with the new metal.
Adding valley metal to promote proper drainage.
Finished product - looking good!
30'x30'x12' Framed Shop
This shop has a monolithically-poured foundation, with 36"-deep walls approximately 12"-wide. Customer has requested 3'x3' rebar grid and plastic barrier.
Concrete is poured and bull-floating the pad.
Framing the building with five windows, two walk-doors, and two 10'x10' overhead doors.
Customer requested Tyvek-wrapped walls.
Roof metal applied on trusses installed 2'-on-center, windows and doors installed, wainscoting applied.
Rear view with the 10'x30' lean-to.
Hwy 2 - Troy, mt
30'x40'x16' pole building with no eaves, and (1) 12'x14' and 10'x10' overhead doors. Also a concrete floor. Here, we have framed the nailers up 2'-on-center, and framed the 2"x10" box beam for the trusses to sit on.
Three sides almost done
Applying power-troweled finish to the floor
View of the rear of the building
Side and front views of the building
Bottle Bay Rd sagle, id
30'x50'x14' shop with mono-pour concrete floor. Here, we are doing the excavation and pad-prep.
Pad prepped and ready for concrete.
Applying power-trowel finish
Framing walls
Building wrapped and overhead doors framed
Sidewall steel up and soffits
Ready for overhead doors to be installed.
Sheeting the roof.
Trusses set, ready for sheeting.
First truss set.
Walls sheeted...
Black bear rd athol, id
We started out just with the foundation and garage slab - and ended up building the whole house!
Here, the footings are set up, and getting ready to pour.
Stripping forms and setting up stemwalls.
Getting walls are ready to pour.
Setting up the floor joists.
Floor sheeted and walls going up!
Walls sheeted...
Front porch concrete.
Camp 9 - Bonners ferry
The out-of-state owner wanted a shop/living space combination to stay while he builds a house. The front, lower-roof section is the living quarters, and the taller, rear section is the garage.
The building also had an 8'-wide lean-to off the front side of the building.
This is a framed shop on a mono-poured foundation. Over the framed walls, we applied sheeting and housewrap, and then add 1x4's so there is something to attach the metal screws to.
Exterior metal applied.
Exterior metal applied.
Overhead door installed.
Forest Knolls Dr sandpoint
This is a 24'x40'x14' framed shop on a mono-poured foundation. The customer has attic trusses and the windows in the gables for upstairs storage.
This building has framed and sheeted walls, custom siding and a metal roof.
This building has framed and sheeted walls, custom siding and a metal roof.
bowen arrow rd samuels
This 40'x40'x16' building will serve a dual purpose as a garage and a living space. Owners requested polycarb panels for light (instead of windows), as well as a ledger board for future lean-to.
View from the other side.
Rear view
blanchard, id
This project is a returning customer who wanted a pavilion to enjoy spring thru fall. She provided us a concept picture - and away we went!
This structure is up, the roof shingled, and now we are adding the tongue-and-groove underneath.
Customer wanted colored, stamped concrete and chose this slate pattern.
Customer wanted colored, stamped concrete and chose this slate pattern.
The T&G is installed, and the decorative braces are also installed.
The T&G is installed, and the decorative braces are also installed.
Finished product!
Customer also requested coverings over the front door and garage door to match the new pavilion.
A place for a title
Customer also requested coverings over the front door and garage door to match the new pavilion.
